Previewing The Alarm And Turning The Alarm On/Off - iHome iKT50 Instruction Manual

Setting and Using the Alarm (Continued)
2. Press the – or + Buttons to adjust the alarm time to the desired time (hold for rapid setting).
Make sure you set the correct AM/PM alarm time.
3. Press the Alarm Button to confirm the alarm time setting. The alarm schedule will flash.
4. Press the – or + Buttons to set the alarm schedule ('7 DAYS' = the whole week,
'5 DAYS' = Monday through Friday, '2 DAYS' = Saturday and Sunday only).
5. Press the Alarm Button to confirm the alarm schedule setting. The wake-to source
will flash.
6. Press the – or + Buttons to select the desired wake to alarm source: Bluetooth,
radio or tone. The selected wake-up source will flash in the lower part of the
display.
Wake to Bluetooth: You will wake to the currently linked Bluetooth device. If no
Wake to Radio: Press the Alarm Button to confirm. Press the
to wake to, or press the – or + Buttons to tune in a desired wake to station.
If FM antenna is not connected, the alarm will default to Tone.
Wake to Tone: Press the Alarm Button to confirm. Press the – or + Buttons as needed to listen to
and to select one of the four built-in wake-to tones (1 - 4).
7. Press the Alarm Button to confirm the alarm source. The volume display will flash.
8. Press the – or + Buttons to adjust the alarm volume. Note that the alarm volume setting is stored
separately from other volume settings.
9. Press the Alarm Button to confirm the alarm settings and exit alarm setting mode. 2 beeps will confirm
alarm setting is complete. The alarm icon will remain on the display, indicating the alarm is armed.
10. When alarm is sounding, press the
reset it come on the next day at the same time (unless settings are changed).

Previewing the Alarm and Turning the Alarm On/Off

1. Press and release the Alarm Button to view the current alarm time.
2. Press and release the Alarm Button as needed to toggle the alarm ON and OFF, indicated by the alarm
icon and a beep.
device is detected, the alarm will default to Tone.
Power Button or Alarm 1 or Alarm 2 Button to silence alarm and
Presets Button to select an FM preset
11
K4
Using the