Yard force YF1600A1 Operator's Manual page 10

3. Connect high-pressure hose to spray gun (Fig. 4)
Attach high-pressure hose to the spray gun, tighten by hand until two parts are locked.
4. Fit the spray wand to spray gun (Fig. 5)
Attach desired color coded spray tip to quick-connect spray wand by pushing to ensure
it is clicked in securely. Insert quick–connect spray wand into the spray gun, hand
tighten until two parts are locked.
CAUTION
Placing any spray tip too close to a surface can result in permanent
damage to the surface being sprayed. Maintain at least a 24" distance
between the tip and the surface being sprayed until you have determined
it is safe to move the tip closer to the surface.
5. Connect garden hose (Fig. 6)
Attach the garden hose to water inlet of the pressure washer, tighten by hand.
6. Connect to water supply (Fig. 7)
Attach garden hose to water supply and turn water valve on to the fall on position. The
water temperature must not exceed 104
40 to 80 PSI.
CAUTION
The pressure washer must only be used with clean water. Use of
unfiltered water or corrosive chemicals will damage the pressure washer.
Fig. 4
Green
25°
Used for
general clean
Green
25°
Used for
general clean
Fig. 6 Fig. 7
o
F and the supply pressure must be between
9
Black Turbo
Low pressure Rotating flush
Used for
detergent
Black Turbo
Low pressure Rotating flush
Used for
detergent
Fig. 5