Table of Contents
Advertisement
WARNING:
Before working inside your computer, read the safety information that shipped with your computer and follow the
steps in
Before working inside your
your
computer. For more safety best practices, see the Regulatory Compliance home page at
regulatory_compliance.
Topics:
•
Prerequisites
•
Procedure
Prerequisites
1
Remove the
base
cover.
2
Remove the battery.
Procedure
1
Open the cable latch on the touch pad.
2
Disconnect and remove the cable from the touch pad.
3
Remove the two screws (M2x2) that secure the touch pad to the palm-rest assembly, then lift the touch pad from the inner edge and
remove it from the palm-rest assembly.
computer. After working inside your computer, follow the instructions in
Removing the touchpad
www.dell.com/
15
After working inside
Removing the touchpad
25
Advertisement
Table of Contents
