Table of Contents
Advertisement
WARNING:
Before working inside your computer, read the safety information that shipped with your computer and follow the
steps in
Before working inside your
your
computer. For more safety best practices, see the Regulatory Compliance home page at
regulatory_compliance.
CAUTION:
Solid-state drives are fragile. Exercise care when handling the solid-state drive.
CAUTION:
To avoid data loss, do not remove the solid-state drive while the computer is in sleep or on state.
Topics:
•
Prerequisites
•
Procedure
Prerequisites
1
Remove the
base
cover.
2
Remove the battery.
Procedure
1
Peel off the display cable tape from the hard-drive plate.
2
Remove the two screws (M1.6x2.5) that secure the hard-drive plate to the system board.
3
Remove the hard-drive plate.
4
Slide and remove the solid-state drive from the solid-state drive slot.
Removing the solid-state drive
computer. After working inside your computer, follow the instructions in
After working inside
www.dell.com/
Removing the solid-state drive
7
15
Advertisement
Table of Contents
