6. Tighten the (M2.5x8) screws to secure the display hinge to the computer.
7. Install the:
a.
Base cover
b.
Keyboard
c.
Optical drive
d.
Battery
8. Follow the procedures in
Touchpad
Removing the touchpad
1. Follow the procedure in
2. Remove the:
a.
Battery
b.
Optical drive
c.
Keyboard
d.
Base cover
e.
HDD
f.
WLAN card
g.
Coin cell battery
h.
Heatsink
i.
Memory module
j.
Speaker
k.
System board
3. To disconnect cable:
a. Remove the M2x3 screw that secures the LED metal shield to the touchpad [1,2].
After working inside your
Before working inside your
computer.
computer.
Disassembly and reassembly
45