Table of Contents
Advertisement
WARNING:
Before working inside your computer, read the safety information that shipped with your computer and follow the
steps in
Before working inside your
your
computer. For more safety best practices, see the Regulatory Compliance home page at
regulatory_compliance.
Topics:
•
Procedure
•
Post-requisites
Procedure
1
Slide the palm-rest assembly under the display hinges and align the screw holes on the palm-rest assembly with the screw holes on
the display hinges.
2
Replace the six screws (M2.5x3.5) that secure the palm-rest assembly to the display hinges.
3
Close the palm-rest assembly.
4
Connect the display cable to the system board.
5
Align the screw holes on the display-cable bracket with the screw holes on the system board.
6
Replace the two screws (M1.6x2.5) that secure the display-cable bracket to the system board.
7
Adhere the display cable tape to the system board.
8
Connect the touch-screen cable and camera cable to the system board.
Post-requisites
1
Reconnect the
wireless
card.
2
Replace the battery.
3
Replace the
base
cover.
Replacing the display assembly
computer. After working inside your computer, follow the instructions in
After working inside
www.dell.com/
Replacing the display assembly
18
29
Advertisement
Table of Contents
