Table of Contents
Advertisement
WARNING:
Before working inside your computer, read the safety information that shipped with your computer and follow the
steps in
Before working inside your
your
computer. For more safety best practices, see the Regulatory Compliance home page at
regulatory_compliance.
Topics:
•
Prerequisites
•
Procedure
Prerequisites
1
Remove the
base
cover.
2
Remove the battery.
Procedure
1
Peel off the tape securing the speaker cable to the system board.
2
Disconnect the speaker cable from the system board.
3
Note the speaker-cable routing and peel off the tape that secures the speaker cable to the system board.
4
Remove the four screws (M2x2) that secure the speakers to the palm-rest assembly.
5
Lift the speakers, along with its cables, off the palm-rest assembly.
computer. After working inside your computer, follow the instructions in
Removing the speakers
www.dell.com/
11
After working inside
Removing the speakers
21
Advertisement
Table of Contents
