Table of Contents
Advertisement
WARNING:
Before working inside your computer, read the safety information that shipped with your computer and follow the
steps in
Before working inside your
your
computer. For more safety best practices, see the Regulatory Compliance home page at
regulatory_compliance.
Topics:
•
Prerequisites
•
Procedure
Prerequisites
1
Remove the
base
cover.
2
Remove the battery.
3
Remove the
solid-state
drive.
4
Disconnect the
wireless
card.
5
Remove the speakers.
6
Remove the
coin-cell
battery.
7
Remove the
system
board.
Procedure
1
Remove the two screws (M1.6x3) that secure the SSD bracket to the palm-rest assembly.
2
Lift the SSD bracket off the keyboard and the palm-rest assembly.
3
Remove the 23 screws (M1.6x1.5) that secure the keyboard to the palm-rest assembly.
4
Remove the six (M2x2) screws that secure the keyboard to the palm-rest assembly.
5
Lift the keyboard off the palm-rest assembly.
34
Removing the keyboard
computer. After working inside your computer, follow the instructions in
Removing the keyboard
www.dell.com/
21
After working inside
Advertisement
Table of Contents
