Connecting To A Computer - Sanyo PLC-XW65K Owner's Manual

Connecting to a Computer

Cables used for connection
• VGA Cables (Mini D-sub 15 pin) (Only one cable is supplied.)
• Audio Cables (Mini Plug: stereo)
( Not all the cables are supplied with this projector.)
Audio Output
Audio cable
(stereo)
✔
Notes:
• Input sound to the COMPUTER / COMPONENT AUDIO IN terminal when using the COMPUTER IN 1
/S-VIDEO IN / COMPONENT IN and the COMPUTER IN 2 / MONITOR OUT terminal as input.
• When the AUDIO OUT is plugged-in, the projector's built-in speaker is not available.
• When the cable is of the longer variety, it is advisable to use the COMPUTER IN 1 /S-VIDEO IN /
COMPONENT IN and not the COMPUTER IN 2/MONITOR OUT.
Unplug the power cords of both the projector and external equipment from the AC outlet before
connecting cables.
Monitor Output
Monitor Output
Monitor Input
VGA cable
COMPUTER IN 1
COMPUTER IN 2/
/ S-VIDEO IN
MONITOR OUT
/COMPONENT IN
COMPUTER/
COMPONENT
AUDIO IN
or
VGA cable
This terminal is switchable.
Set up the ter minal as
either Computer input or
Monitor output. (See Page
50.)
Installation
External Audio Equipment
Audio Input
Audio cable
(stereo)
AUDIO OUT
(stereo)
15