Sanyo PLC-XW65K Owner's Manual page 30

Computer Input
Display area H
Adjust the horizontal area displayed by this projector.
Press the Point 7 8
value.
Display area V
Adjust the vertical area displayed by this projector. Press
the Point buttons to decrease/increase the value.
7 8
Reset
To reset the adjusted data, select Reset and press the
SELECT button. The confirmation box appears and then
select [Yes]. All adjustments return to their previous
figures.
Mode free
To clear the stored data, move the red framed pointer to
the Mode free item and then press the SELECT button.
Move the red arrow pointer to the Mode that you want to
clear and then press the SELECT button.
Store
To store adjusted data, move the red framed pointer to the
Store item and then press the SELECT button. Move the
red arrow pointer to any of Mode 1 to 5 in which you want
to store and then press the SELECT button.
Quit
Exit the PC Adjust Menu.
✔
Note:
Display area (H/V) cannot be selected when 480i,
575i, 480p, 575p, 720p, 1035i, or 1080i is selected in
the PC System Menu (p.27).
0
buttons to decrease/increase the
M o v e t h e r e d f r a m e d
pointer to an item and
press the SELECT button.
This Mode has stored parameters.
To clear adjusted data
Vacant Mode Values of "Total dots",
"Horizontal", "Vertical",
"Display area H" and
"Display area V".
To store adjusted data
Close this dialog box.