Computer Input
Input Source Selection (RGB: Computer 1/Computer (Analog))
Direct Operation
Choose either Computer 1 or Computer by pressing the INPUT button on the top control or press the
COMPUTER button on the remote control.
Before using these buttons, correct input source should be selected through Menu operation as described
below.
Remote Control
Menu Operation
1
Press the MENU button to display the On-Screen
Menu. Use the Point
then press the Point
Use the Point
▲▼
or Computer and then press the Point
button to access the submenu items.
3
When Computer 1 is selected, use the Point
buttons to select RGB and then press the SELECT
button.
When Computer is selected, use the Point
buttons to select RGB(Analog) and then press the
SELECT button.
Note:
• Network is for the Network function. See owner's
manual "Network Set-up and Operation".
• When the Input Search function is set to On1 or On in
the Auto setup function, the input signal will be searched
automatically (p.47).
COMPUTER button
Computer 1
Computer
buttons to select Input and
▲▼
or SELECT button.
►
buttons to select either Computer 1
or SELECT
►
Top Control
Input Menu
▲▼
▲▼
Computer
1
INPUT button
Computer 1
Computer
Video
S-video
Network
9