Input Source Selection (Component, Rgb Scart 21-Pin) - Sanyo PLC-XU305K Owner's Manual

Video Input
Input Source Selection (Component, RGB Scart 1-pin)
Direct Operation
Choose Computer 1(Component) or Computer 1(Scart) by pressing the INPUT button on the top control or
press the COMPUTER button on the remote control.
Before using these buttons, correct input source should be selected through Menu operation as described
below.
Remote Control
Menu Operation
1 Press the MENU button to display the On-Screen
Menu. Use the Point
then press the Point
Use the Point
▲▼

then press the Point
Use the Point
▲▼
3
RGB(Scart) and then press the SELECT button.
When the input source is coming from video
Component
equipment connected to the COMPUTER
IN 1/COMPONENT IN terminal with a
Component-VGA Cable, select Component.
When the input source is coming from video
RGB (Scart)
equipment connected to the COMPUTER
IN 1/COMPONENT IN terminal with a Scart-
VGA Cable, select RGB (Scart).
Note:
• Network is for the Network function. See owner's
manual "Network Set-up and Operation" .
• When the Input Search function is set to On1 or On,
the input signal will be searched automatically (p.47).
40
COMPUTER button
Computer 1
Computer 
buttons to select Input and
▲▼
or SELECT button.
►
buttons to select Computer 1 and
button.
►
buttons to select Component or
INPUT button
Top Control
Input Menu
Computer 1
Computer 
Video
S-video
Network