Remote Control Operation - Sanyo PLC-XU305K Owner's Manual

Remote Control Operation

Using the remote control for some frequently used operations is advisable. Just pressing one of the buttons
enables you to make the desired operation quickly without calling up the On-Screen Menu.
COMPUTER/VIDEO/NETWORK button
Press the COMPUTER, VIDEO or NETWORK button on
the remote control to select the input source. See pages29-
30,39-40 for details.
Refer to the owner's manual "Network Set-up and
Operation" for details about the network input.
FREEZE button
Press the FREEZE button on the remote control to freeze
the picture on the screen. To cancel the Freeze function,
press the FREEZE button again or press any other button.
INFO. button
Display the input source information: Input , H-sync freq.,
V-sync freq., Screen, Language, Lamp status, Lamp
counter , Power management, Keylock, PIN code lock
and Remote control (p.60).
D.ZOOM buttons
Press the D.ZOOM buttons on the remote control to enter to
the Digital zoom +/– mode. See page 38 for details.
LAMP button
Press the LAMP button on the remote control to select the
lamp mode for changing the brightness on the screen.
Normal ....... Normal brightness.
Eco ............ Lower brightness reduces the lamp power
consumption and extends the lamp life.
Remote Control
COMPUTER
button
INFO.
button
D.ZOOM
buttons
LAMP
button

Note:
See the next page for the description of other
buttons.
Basic Operation
VIDEO button
NETWORK
button
POINT ▲▼buttons
FREEZE button
27