Sanyo PLC-XU305K Owner's Manual page 51

Enter a Logo PIN code
Use the Point buttons to enter a number. Press the
▲▼
Point button to fix the number and move the red frame
►
pointer to the next box. The number changes to
you fixed an incorrect number, use the Point
move the pointer to the number you want to correct, and
then enter the correct number.
Repeat this step to complete entering a four-digit
number.
After entering the four-digit number, move the pointer to
Set. Press the SELECT button so that you can start to
operate the projector.
If you entered an incorrect Logo PIN code, Logo PIN
code and the number (
   
moment. Enter the correct Logo PIN code all over again.
Change the Logo PIN code lock setting
Use the Point buttons to switch On or Off, and then
▲▼
press the SELECT button to close the dialog box.
Logo PIN code change
Logo PIN code can be changed to your desired four-digit
number. Press the Point
code change and then press the SELECT button. The
New Logo PIN code input dialog box appears. Set a new
Logo PIN code.
Be sure to note the new Logo PIN code and keep it on
hand. If you lost the number, you could no longer change
the Logo PIN code setting. For details on PIN code
setting, refer to "PIN code lock" on pages 56-57.

button to
◄
) will turn red for a
button to select Logo PIN
▼
. If
Enter a Logo PIN code
Change the Logo PIN code lock setting
Change the Logo PIN code
CAUTION:
wHEN yOU HAVE CHANGED THE LOGO PIN
CODE, wRITE DOwN THE NEw PIN CODE
IN COLUMN OF THE LOGO PIN CODE NO .
MEMO ON PAGE 79, AND KEEP IT SECURELy .
SHOULD THE LOGO PIN CODE BE LOST OR
FORGOTTEN, THE LOGO PIN CODE SETTING
CAN NO LONGER BE CHANGED .
Setting
After a correct Logo PIN code
is entered, the following dialog
box appears.
51