Data Logging; Measurements; Log Mode/Log Settings; Delete Data - TSI Instruments IAQ-CALC 7525 Manual

1.800.561.8187

DATA LOGGING

Measurements

Measurements to be logged are independent of measurements on the
display, and must therefore be selected under DATA LOGGING
Measurements.

Log Mode/Log Settings

You can set Log Mode to Manual, Auto-save, or Cont-key.
• Manual mode does not automatically save data, but instead prompts
the user to save a sample.
• In Auto-save mode, the user manually takes samples that are
automatically logged.
• In Cont-key mode, the user starts taking readings and logging by
pressing the key. The instrument will continue taking
measurements until the
•
Auto-save and Cont-Key modes have the following additional Log
Settings:
Mode
Auto-save
Cont-key
•
Pressing the keys simultaneously will lock the keypad to
prevent unauthorized adjustments to the instruments. To unlock the
keypad, press the

Delete Data

Use this to delete all data, delete test or delete sample.

% Memory

This option displays the memory available. Delete All, under Delete
Data, will clear memory and reset the memory available.

APPLICATIONS

You can choose % Outside Air in the Applications menu. After choosing
this application, take measurements or enter data for each line.
LogDat2 Downloading Software
™
The Model 7525 comes with special software called LogDat2 Downloading
Software, which is designed to provide you with maximum flexibility and
power. To install this software on your computer, follow the instructions on
the label of the LogDat2 CD-ROM.
Operation
www.
key is pressed again.
Log Settings
Log Interval
Log Interval
keys simultaneously.
information@itm.com
.com
7