Park Scale Models AT-17 Bobcat Assembly Manual page 7

20. Fit and glue F12 to F10 and the fuselage sides.
21. Fit and glue F11 to F12, F12A and the fuselage
sides.
22. Epoxy F11A to F11, F12A and the fuselage sides.
23. If you plan to install a steerable tail wheel it is
recommended to use a Dubro 1/2A steerable nose
wheel. Screw the mount to F11 using the pre-
drilled holes in F11. You will need to install the
control linkage to connect the tail wheel to the
rudder servo.
If you do not wish to install a steerable tail wheel,
a fixed tail wheel can be installed later.