Park Scale Models AT-17 Bobcat Assembly Manual page 11

4. Fit and glue WL1 and WL2 in place.
5. Sheet the bottom of the center wing section with
1/16" balsa.
6. Cut the electronics tray from some scrap wood
using the template at the end of the manual. Glue
to WS1A, WS2A and R1(x2).
7. Sand TE1 to match the contour of the ribs. Sheet
the top of the wing center section with 1/16"
balsa. Cut out the sheeting around the electronics
tray area.
WL1
WL2