Top Control - Sanyo PLC-SU51 Owner's Manual

Part Names and Functions

Top Control

q AUTO SETUP button
Corrects vertical keystone distortion and adjusts
computer display parameters including Fine sync., Total
dots and Picture position. (p24, 42)
w INPUT button
Selects input source. (p27, 36 )
e POWER ON–OFF button
Turns the projector on or off. (p20, 21)
r SELECT button
Executes the item selected. It is also used to expand/
compress the image in Digital zoom +/– mode. (p34)
t POWER indicator
Blinks red until the projector gets ready to be turned on.
It turns red when the projector is in the stand-by mode.
It remains green while the projector is under operation.
(p21, 58)
10
q w e r
ON - OFF
INPUT
AUTO SET UP
SELECT
MENU
o i
t y
POWER
WARNING
LAMP
REPLACE
u
y WARNING indicator
Lights red when the projector detects abnormal
condition. This also blinks red when the internal
temperature of the projector exceeds the operating
range. (p49, 58)
u LAMP REPLACE indicator
Turns yellow when the life of the projection lamp draws
to an end. (p52, 58)
i POINT (
e e d d 7 8 ) button
Selects an item or adjusts value in the On-Screen Menu.
These are also used to pan the image in the Digital zoom
+/– mode. (p34)
Point 7 8 button are used as VOLUME +/– button.
(p26)
o MENU button
Opens or closes the On-Screen Menu. (p22)