Connecting To Component Video Equipment - Sanyo PLC-SU51 Owner's Manual

Connecting to Component Video Equipment

Cables used for connection
• Audio Cables (Mini Plug (stereo) x 2 or RCA x 2) ✽
• Scart-VGA Cable ✽
• Component-VGA Cable ✽
✽
( = Not supplied with this projector.)
RGB Scart 21-pin Output
Scart-VGA cable ✽
COMPUTER IN 2/
COMPONENT IN/
MONITOR OUT
COMPUTER IN 1
COMPUTER IN 1
MCI
✔
Note:
• Input sound to the COMPUTER/COMPONENT AUDIO IN terminal when using the
COMPUTER IN 2/COMPONENT IN/MONITOR OUT terminal as input.
• When connecting AUDIO OUT to external audio equipment, the projector's built-in
speaker is disconnected.
Note:
When connecting the cable, the power cords of both the projector and
the external equipment should be disconnected from AC outlet.
Component Video Output
Audio Output
(Y, Pb/Cb, Pr/Cr)
Component-VGA
cable✽
COMPUTER IN 2/
COMPONENT IN/
MONITOR OUT
AUDIO IN AUDIO IN
R L VIDEO USB
R L (MONO) VIDEO USB
(MONO)
DVI - I
DVI - I
SERVICE PORT S-VIDEO S-VIDEO
SERVICE PORT COMPUTER /
COMPUTER
/ COMPONENT COMPONENT
RESET
RESET
AUDIO IN
AUDIO IN
AUDIO OUT
AUDIO OUT
COMPUTER IN 2 /
COMPUTER IN 2 /
COMPONENT IN /
COMPONENT IN /
MONITOR OUT MONITOR OUT
(VARIABLE)
(VARIABLE)
External Audio Equipment
Audio cable ✽
(stereo)
Audio Input
COMPUTER/ COMPONENT
AUDIO IN
Audio cable ✽
(stereo)
AUDIO OUT
(stereo)
Installation
19