Setting - Sanyo PLC-SU51 Owner's Manual

Setting

Setting
This projector has Setting menu that allows you to set up the
other various functions described as follows;
1 Press the MENU button to display the On-Screen Menu.
Press the Point
the Setting Menu icon.
2 Press the Point
the item that you want to set and then press the SELECT
button. The Setting dialog box appears.
Language
The language used in the On-Screen Menu is available in English,
German, French, Italian, Spanish, Portuguese, Dutch, Swedish,
Russian, Chinese, Korean, or Japanese.
Auto Setup
This function enables Auto Keystone correction and Auto PC
adjustment by pressing the AUTO SETUP button on the top
control or the AUTO SET button on the remote control. Settings
for those functions can be altered as follows:
Auto PC Adj.
On . . . . . . .enables Auto PC Adjustment when pressing the
AUTO SET button on the remote control or the
AUTO SETUP button on the top control.
Off . . . . . . .disables Auto PC Adjustment.
Auto Keystone
Auto . . . . . . always works and corrects keystone distortion
according to the projector's tilt.
Manual . . . .works only when pressing the AUTO SET button on
the remote control or the AUTO SETUP button on
the top control.
Off . . . . . . .disables Auto Keystone.
✔
Note:
• Auto PC Adj. and Auto Keystone cannot be set "Off" at the same time.
• Auto Keystone corrects vertical distortion only, not correct horizontal distortion.
• The Auto Keystone cannot work when Ceiling feature is On in the Setting menu.
(p44)
• Perfect correction of the image distortion cannot be ensured with the Auto Setup
function. If the distortion is not corrected properly by pressing the AUTO SETUP/
AUTO SET button, adjust manually by pressing the KEYSTONE button on the
remote control or selecting Keystone in the Setting menu. (See p25 or Keystone
feature below.)
Keystone
This function corrects distortion of a projected image. Select
either Store or Reset with the Point
the Select button. The keystone dialog box appears. Adjust
keystone with the Point
Store . . . . stores the keystone adjustment even if the AC
power cord is disconnected.
Reset . . . . .resets the keystone adjustment when the AC power
cord is disconnected.
42
button to move the red frame pointer to
7 8
d d button to move the red frame pointer to
7 8 button, and then press
e e d d 7 8 button.
Setting Menu (Language)
Set the red frame
pointer to the item
and press the
SELECT button.
When pressing the SELECT
button at Language, the
Language Menu appears.
Auto Setup
Select Auto setup and this box
appears.
setting for Auto keystone and
Auto PC adj. with the Point 7
8 button.
Setting Menu icon
Choose desired