Screen Size Adjustment - Sanyo PJLINK PLC-WM4500 Owner's Manual

Multimedia projector

Hide thumbs Also See for PJLINK PLC-WM4500:

Owner's manual (60 pages)

User manual (1 page)

Command list (1 page)

Table Of Contents

Table of Contents

Computer Input

Reset

To reset the adjusted data, select Reset and press the SELECT

button. A confirmation box appears and then select yes. All

adjustments will return to their previous figures.

Store

To store the adjusted data, select Store and press the Point u or

the SELECT button. Use the Point pq buttons to select one from

Image 1 to 10 and press the SELECT button.

A confirmation box appears and then select yes. Stored data can

be called up by selecting an Image (1–10) in the Image Mode

Selection on page 40.

Select the desired screen size that conforms to the input signal

source.

Press the MENU button to display the On-Screen Menu. Use

the Point pq buttons to select Screen and then press the

Point u or the SELECT button.

Use the Point pq buttons select the desired item and then

press the SELECT button.

Normal

Provide the image within a screen size keeping its original aspect

ratio.

Full

Provide the image to fit full screen size.

Wide (16:9)

Provide the image at the 16:9 wide screen ratio.

Zoom

Scale the image proportionally to fit the entire screen. Either side of

image may go over the screen.

True

Provide the image in its original size. When the original image size

is larger than the screen size (1280 x 800), the projector enters to

the panning mode automatically. Use the Point pqt u buttons

to pan the image. When adjusted, the arrows will turn red. When

reached to the correction limits, the arrows will disappear.

Custom

Provide the last stored aspect screen image.