Sound Adjustment - Sanyo PJLINK PLC-WM4500 Owner's Manual

Basic Operation
Direct Operation
Volume
Press the VOLUME+/– buttons on the side control or on the
remote control to adjust the volume. The volume dialog box
appears on the screen for a few seconds.
Mute
Press the MUTE (Point q) button on the remote control to select
On to temporarily turn off the sound. To turn the sound back on,
press the MUTE (Point q) button again to select Off or press the
VOLUME +/– buttons. The Mute function is also effective for the
AUDIO OUT jack.
Menu Operation
1
Press the MENU button to display the On-Screen Menu. Use
the Point pq buttons to select Sound. Press the Point u or
the SELECT button to access the submenu items.

Use the Point pq buttons to select the desired submenu item
and press the SELECT button to access the selected item.
Volume
Press the Point u button to turn up the volume; press the Point t
button to turn down the volume.
Built-in SP
Press the Point pq buttons to switch the Built-in SP function On/
Off. When the Built-in SP sound is turned off, Off is displayed.
Mute
Press the SELECT button to switch the mute function On/Off.
When the sound is turned off, On is displayed. Press the VOLUME
+/– buttons again to turn the sound back on.


Sound Adjustment

Side Control
Remote Control
Volume Dialog Box
Sound Menu
VOLUME +/– buttons
VOLUME – button
VOLUME + button
MUTE (Point
Approximate level
of the volume.
q
Press the Point button to set the
Mute function On or Off. The dialog box
disappears after 4 seconds.
q
) button