Sanyo PJLINK PLC-WM4500 Owner's Manual page 52

Setting
Display
This function decides whether to display On-Screen Displays.
On ............................... Show all the On-Screen displays. Use this
Countdown Off .......... Show the input image instead of the
Off ............................... Hide the On-Screen Displays except;
Background
Select the background screen for when no input signal is detected.
Press the Point pq buttons to switch between each option.
Blue . . . . Project a blue background.
Black . . . Project a black background.
It is invalid when there is no image.
User . . . . Project an image captured in the Logo setting.
Logo (Logo and Logo PIN code lock settings)
This function allows you to customize the screen logo with Logo
select, capture, Logo PIN code lock and Logo PIN code
change functions.
P
Note:
W hen On is selected in the Logo PIN code lock function, Logo select,
Capture and Logo PIN code change cannot be selected.
Logo select
This function decides on the starting-up display from among
following options.
User .......... Show the image you captured.
Default ...... Show the factory-set logo.
Off ............. Show the countdown display only.
5
function when you want to project images
after the lamp becomes bright enough. The
factory default setting is in this option.
countdown when turning on the projector.
Use this function when you want to project
the image as early as possible even when
the lamp is not bright enough.
ü
On-Screen Menu
ü
Power off? (p.24)
ü
No signal for Power management.
(p.59)
ü
Please wait . . .
ü
Arrows for the True function in the
Screen Menu (p.42)
ü
P-timer
ü
Simple mode
ü
Picture in Picture
Logo select