Keystone Correction - Sanyo PJLINK PLC-WM4500 Owner's Manual

If a projected picture has keystone distortion, correct
the image with Keystone adjustment.
It is not available when On-Screen menu is displayed.
Press the KEYSTONE button on the remote control. The keystone
dialog box appears.
Correct keystone distortion by pressing the
Point pq buttons on the remote control. Keystone
adjustment can be memorized. (p.44, 50)
Reduce the upper width
with the Point p button.

Keystone Correction

Reduce the lower width
with the Point q button.
Remote Control
POINT
KEySTONE button
P Note:
• The white arrows indicate that there is no correction.
• A red arrow indicates the direction of correction.
• An arrow disappears at the maximum correction.
• If you press and hold the KEYSTONE button for
more than 3 seconds while the Keystone correction
dialog box is being displayed, the Keystone
correction adjustment will be released.
• The adjustable range is limited depending on the
input signal.
Basic Operation
pq
buttons
1