Power Control And Status Check - Sanyo PJ-Net Organizer Plus POA-PN40 Owner's Manual

Chapter 4 Controlling the Projector

Power control and status check

Click Power & Status on the main menu. The control page will be dis-
played.
By clicking ON or Standby button on the page, the power of the projec-
tor can be controlled.
Item
PJ status
Power ................... Displays the status of the lamp. (ON, OFF , On starting up, On cooling down)
Status ................... Displays the status of the projector's power. (Refer to next page.)
Power control ........ Controls the projector power by clicking the "ON" or "Standby" button.
PJ temp.
Inside temp.A ...... Displays the surrounding temperature of lamp in the projector. (Sensor A)
Inside temp.B ...... Displays the surrounding temperature of panel in the projector. (Sensor B)
External temp. ..... Displays the surrounding temperature of the intake vent. (Sensor C)
....... The warning icon will appear if the temperature exceeds a specified value. Check
40
Description
if there is no object to obstruct the airflow around the intake or exhaust vent. It
might be airfilter clogged. Clean up the airfilter.
* The temperature unit can be set either Centigrade or Fahrenheit in item "Initial
Setting". (☞p.28)
Confirmation window
appears when the
button is pressed.
Standby
Popup confirmation window