Table of Contents
Advertisement
Chapter 3 Basic Setting and Operation
Login the setting page of the projector
1
Enter the IP address
Launch the web browser installed in
your computer, enter the IP address
into the "Address" on the browser and
then press "Enter" key.
Enter the address (192.168.1.201) that
you configured in item "Network config-
uration" (☞ p.18). The default IP address
is [192.168.0.2].
2
Select a display mode and login
This product provides 2 types of control mode, Standard Mode and Light Mode as
the below. Select a proper mode to match your PC and network environment by
clicking on the text link.
If the setting page has set the password, the
authentication window will appear. In this case
type "user" onto the User Name text area and the
login network PIN code onto the Password text
area and then click OK button.
* The entering User Name must be "user" and it can not
be changed.
[Note]
When accessing the projector for the first time or the
network PIN code "0000" is set, the auto-login will be
performed and the next main setting page is displayed.
24
STANDARD MODE For computer display, displays
graphical menus and settings. This
mode is recommended for stan-
dard use.
LIGHT MODE
Displays with 200 x 300 dots. This
mode is optimized for use of the
handheld computer, PDA, etc. It
is also convenient if the network
traffic is heavy.
Advertisement
Table of Contents
