Chapter 2 Installation
[2] Installation and network configuration
Mounting
1
Disconnect the AC plug from the
projector.
2
Remove the connector cover and screw
covers (2 pieces) from the projector and
insert plug on this product to the option
connector.
3
Tighten two screws by using a
coin etc.
Caution
!
✐ AC cord must be disconnected when mounting or removing this product otherwise it may
damage the product.
✐ Do not install multiple Network Units into a projector otherwise it may damage the product.
✐ Connect the AC cord after connecting the LAN cable and computer.
16
Connector cover