Table of Contents
Advertisement
Chapter 3 Basic Setting and Operation
SNMP setting
This product provides a SNMP (Simple Network Management Protocol)
agent function. The SNMP consists of a manager and agents. The
group which communicates information each other with SNMP is called
"Community". There are two access modes in a community, Refer (read
only) and Set (read- write). This product allows to use Refer (read only) only. The SNMP
message informs the projector status called "Trap" to an administrator. Click SNMP
Setting on the main menu and set up each item.
The SNMP agent provided with this product is based upon MIB-2 defined by RFC1213.
✐
36
PJ information
Item
Description
Contact ..............Enter user name of the projector etc. (optional)
Place..................Enter place of the projector (optional)
Community
name(refer)........Enter community name (read only). Default name
is "public".
Advertisement
Table of Contents
