E-Mail Setting - Sanyo PJ-Net Organizer Plus POA-PN40 Owner's Manual

Chapter 3 Basic Setting and Operation

E-mail setting

This product has an E-mail function which can send an alert message
to users or an administrator if it detects an abnormality on the projector
or run out of the life span of the lamp. Click E-mail Setting on the main
menu and follow the below steps.
1
Setting SMTP server and administrator address
Set the server name or IP address of the SMTP server*
The administrator address is set to "Reply-To" address of the message sent from
the projector.
*1 The SMTP server is a server for sending E-Mail. Please contact your network administrator
to have this SMTP server address.
✐ If the Network Unit sends an alert message due to the abnormality on the projector but the
SMTP server is down in some other reason, the message will not be sent. In this case, the
message "Unable to connect to server." will be displayed on the setting page. To clear this
message, set up SMTP server address again.
✐ To use the E-Mail function, it must be set the DNS address on the Network setting page correctly.
✐ You cannot use this E-mail function if the DNS server and SMTP server cannot be used in
your network environment.
32
Item Description
SMTP server* .......Sets server name or IP address of the SMTP server
1
Administrator
address..............Sets e-mail address of administrator
Add e-mail
address..............Sets e-mail address of the user to send mail when
the projector has an abnormality.
and administrator address.
1