Table of Contents
Advertisement
Chapter 4 Controlling the Projector
48
Item
Description
Logo ..................Sets on or off the logo display on the screen dur-
ing the startup. (Default, My logo, OFF)
Background .......Sets screen background to blue when no signal
input. (Blue, My logo, Black (OFF))
Display...............Switches on or off the on-screen menu display on
the screen.(ON, OFF , CountdownOff)
Freeze................Sets the image to freeze mode.(ON, OFF)
Power
management......Sets into the selected power management mode
(OFF , Ready or Shut down) if the input signal is
interrupted and no control key is pressed for the
specified period of time.
*The specified time can be set 1 to 30 min.
On start..............Sets the power-on mode when connecting the AC
cord to the outlet. (ON, OFF)
Item
Description
Lamp control* ....Selects lamp control mode. (Normal, Eco, Auto)
This function may be disabled depending on the
projectors.
Lamp
Corres. Value(h)......Displays the lamp use time (Corresponding value)
of the lamp . Reset the time after lamp replace-
ment.
Lamp Corres. Value Reset
1. Select a Lamp-1 radio button and then click Reset button.
2. Click OK button to execute the reset.
Item
Description
Remote control
ID.....Sets the remote control ID.(Code 1 - Code 8)
Sets the fan control speed. (Normal, Max)
Fan speed control......
Status ...........Indicates the current fan mode.
Sets all of the projector control items to the fac-
Factory default
....
tory default setting except the following items.
Lamp Corres. Value, PJ time, Network PIN code,
Network setting
* This function is not effective for the settings of
the network unit, Network address settings, e-
mail settings, etc.
PJ lock suspend
When the projector has a security of PIN code
.......
lock, disable this function temporarily by pressing
Yes button.
Setting procedure
1. Turn off the projector , disconnect AC cord from
the outlet and then connect AC cord again.
2. Access this page with the web browser,
3. Click Yes button on the PJ lock suspend.
* This function is disabled after the projector turns
on.
Advertisement
Table of Contents
