Table of Contents
Advertisement
Chapter 3 Basic Setting and Operation
This chapter describes basic operations and settings for controlling the projector via a
network using this product. It is required that computer and projector be connected
to the network and the network address be properly configured.
Login the setting page of the projector
1
Enter the IP address
Launch the web browser installed in
your computer, enter the IP address into
the "Address" on the browser and the
press "Enter" key.
Enter the IP address that you configured in
item "Network Configuration"(
2
Select a display mode and login
This product provides 2 types of control mode, Graphic Mode and Text Mode as
the below. Select a proper mode to match your PC and network environment by
clicking on the text link.
If the setting page has set the password, the authentication window will appear.
In this case type "user" onto the User Name text area and the login password
onto the Password text area and then click OK button.
* The entering User Name must be "user" and it can not be
changed.
[Note]
When accessing the projector at first time or setting the no
password [0000], the auto-login will be performed and the next
main setting page is displayed.
26
p.18). The default IP address is [192.168.0.2].
Graphic Mode Displays with 600 x 400 dots and
Text Mode
the menus and settings with
graphic icons. This mode is rec-
ommended for standard use.
Displays with 200 x 300 dots. This
mode is optimized for use of the
handheld computer, PDA, etc. It is
also convenient if the network
traffic is heavy.
Advertisement
Table of Contents
