Installation And Network Configuration; Mounting - Sanyo PJ-Net Owner's Manual

Chapter 2 Installation
x Installation and Network configuration

Mounting

1
Disconnect the AC plug from the
projector.
2
Remove the connector cover
and screw covers from the pro-
jector and insert plug on this
product to the option connector.
3
Tighten two screws by using a
coin etc.
Caution
!
The AC cord must be disconnected when mounting or removing this product otherwise it
may damage the product.
Do not connect the AC cord until after connecting the LAN cable and computer.
16
Screw cover
Connector cover