Advertisement
After that, you can saw out the roof with
a jigsaw, starting from one of the cor-
ners.
The reinforcing sheet will be cut out in
the area which is marked in red in order
to fit in the reinforcing frame from the
bottom (approx. 20mm more).
Important information: Protect the roof
from falling down!
After having removed the cut-out roof,
the lateral reinforcing clips must be
shortened according to the photograph
opposite so that the reinforcing frame
can be placed laterally.
The clips are cut with a special saw for
the car body. Please pay attention to the
wiring harness!
Stand: März 2013
C.F. Maier Europlast GmbH & Co KG
Seite 6 von 16
Advertisement
