The vehicle must be masked round and
round with adhesive tape alongside the
cutting edge in order to prevent contami-
nation of the car body when applying the
primer or by excessive adhesive. After
that, the roof can be removed again.
Neatly pre-treat the bonding surfaces
according to drawing 194/3 with cleaner
Sika 205 (bonding surface spoiler fasten-
ing in front and bonding surface support
sheets / do not forget reinforcing frame!).
Roughen the surfaces to be bonded at
the platform with abrasive paper.
194/3
Stand: März 2013
C.F. Maier Europlast GmbH & Co KG
Seite 10 von 16