Advertisement
Seal all vehicle openings of the car body
using a varnish-compatible adhesive
tape in order to prevent chips from en-
tering! It is also possible to use the foil
from the packaging.
Seal all the openings as aforemen-
tioned, particularly in the area of the
side windows, as chips can fall in here
easily from above and it is very difficult
to remove them then.
Encase the inside of the vehicle by gen-
erously sticking foil to the area of the
cut-out in order to prevent falling chips
from entering the interior.
Furthermore, the roofing sheet must be
well secured against falling down when
it has been cut out.
Important information: Please pay
attention that the electric cables are not
placed in the cut-out area!
Stand: März 2013
C.F. Maier Europlast GmbH & Co KG
Seite 4 von 16
Advertisement
