SCA 195 Assembly Instructions Manual page 13

After removal of the adhesive tape the
joint must be polished once more with a
sleeking agent in order to obtain an op-
timal result.
Then you can mount the lateral and rear
gas springs. The preloaded gas springs
must be hooked into the ball heads and
secured with the provided locking
springs. As soon as all gas springs have
been hooked, the supports can be re-
moved again.
Now, you can install the slatted frame
and mount the gas springs there as well.
Attention: The gas springs must always
be mounted with the piston rod at the
bottom when open!
Stand: März 2013 C.F. Maier Europlast GmbH & Co KG Seite 13 von 16