Then, apply Sika-Primer 206 G+P lightly
but covering the complete surface (plat-
form and car body!). Apply the primer
with a brush or a cloth!
The flash off time is at least 15 minutes.
Apply Sikaflex 252 sufficiently onto the
bonding surfaces after exhausting the air
from around the product. Additionally
add Sikaflex on the side of the area
around the three boreholes for the
hinged shears.
Then, the roof can be replaced and re-
aligned again. In the area of the spoiler,
the platform is pulled onto the roof sheet
using a strap.
Important information: Pay attention
when placing the roof on top that the
bellows has no contact with the adhesive
(contamination!).
Stand: März 2013
C.F. Maier Europlast GmbH & Co KG
Seite 11 von 16