Advertisement
After that, the platform is clamped inside
onto the reinforcing frame with screw
clamps and left under tension for 48
hours until it is sure that the adhesive
has completely dried.
Attention: Tighten all screw clamps
equally to obtain an even platform.
The external cutting edges on the plat-
form must be neatly masked (the car
body has already been masked after
replacement and alignment).
Fill the sealing joint neatly and com-
pletely with Sikaflex. Remove excessive
Sikaflex evenly with a rubber spatula or
simply with your finger.
Stand: März 2013
C.F. Maier Europlast GmbH & Co KG
Seite 12 von 16
Advertisement
