IBM TS4500 Introduction And Planning Manual page 116

Table 41. FCs for the frame models of the TS4500 tape library (continued)
FC
1407
1408
1450
1442 HA Kit w/Second Accessor
1460
1521
1522
1523
1524
98
IBM TS4500: Introduction and Planning Guide
Model
L25, L55
L25, L55
D25, D55
L25, L55
D25, D55,
L25, L55
D25, D55,
L25, L55
D25, D55,
L25, L55
D25, D55,
L25, L55
CSU Description
No LTO-6 and LTO-7 tape drive support
This triggers the shipment of an L6 CE
cartridge. When model L55 is ordered, a
minimum of one of FC 1405 or 1407 is
required but both can be selected. When
FC 9080 (Mixed Media) is ordered for
model L25, a minimum of one of FC 1405
or 1407 is required but both can be
selected.
No LTO-7 and LTO-8 tape drive support
This triggers the shipment of an L7 CE
cartridge. When model L55 is ordered, a
minimum of one of FC 1407 or 1408 is
required but both can be selected. When
FC 9080 (Mixed Media) is ordered for
model L25, a minimum of one of FC 1407
or 1408 is required but both can be
selected.
No TS4500 frame control assembly (FCA)
No Dual Accessors
This triggers the shipment of
Four CE/diagnostic cartridges (two of
v
latest generation for both LTO and 3592)
v Service Bay Stop-A and Service Bay
Stop-B related parts
v TS4500 Accessor B including scanner,
enhanced grippers, and enhanced node
cards
There is a maximum of one HA kit (1442)
per library.
Redundant Accessor Power/Network
No
This provides power and internal network
redundancy for the L25/L55 frame. This is
a prerequisite to FC 9002.
No First TS4500 quad drive mounting kit
Prequisite: FC 1450 (for Dx5 frame models
only)
No Second TS4500 quad drive mounting kit
Prerequisite: FC 1521. This feature is not
supported if frame is used as ISB.
No Third TS4500 quad drive mounting kit
Prerequisite: FC1522. This feature is not
supported if frame is used as an ISB.
Both Fourth TS4500 quad drive mounting kit
Prerequisite: FC1523. This feature is not
supported if the frame is used as an ISB.