Table of Contents
Advertisement
Why Use An Optical Fiber Power Meter?
Standards organizations such as the TIA or the ISO/IEC provide performance standards that the cabling plant must adhere to in order
to support high-speed protocols such as Gigabit Ethernet. Fiber can be tested against these standards, ensuring that it is able to
handle the high amount of traffic with a maximum amount of reliability.
These standards organizations also provide standards for administration of the cabling plant. These standards require a fiber link to be
certified; that is, a report must be generated from appropriate test equipment for tracking and auditing purposes. These reports can
also be used as verification of compliance to performance standards in case a question comes up about the quality of an installation.
These signed documents cover the installer from liability provided that the link meets specified performance standards.
Our optical fiber power meters are designed with these standards in mind because we understand the importance of qualifying your
fiber installations with standards-compliant test equipment. The meter you have just purchased also prints professionally formatted
reports showing the conformity to these popular industry standards. You can print out these reports as a record of the original
conformity to quality set by the standards. These documents signed by all associated parties may prove valuable in any future disputes
concerning the installation.
Checking The MicroMeter Firmware Version
This manual is written for the MicroMeter firmware version 1.20e. Follow the instructions below to verify the meter's firmware version.
1)
Press
ON
to start up the meter.
2)
After the initial boot-up screen, the display should look like the diagram below. This screen only remains viewable for
approximately 2 seconds.
If the firmware version is not V1.20e, contact our tech support for the correct version of the manual.
Company Name
Company Phone
Serial Number
Firmware Version
.................
.............
SN:MX10001
V1 20e
.
ii
PREFACE
Advertisement
Table of Contents
Need help?
Do you have a question about the MO500 and is the answer not in the manual?
Questions and answers