System Reset Procedure; General Information - Dometic 3314080.000 BLACK Operating Instructions Manual

SYSTEM RESET PROCEDURE

When your unit was installed the appropriate dip switches on the electronic control
board were turned ON to match your system configuration. Any time these settings
are changed, a system reset will need to be done before the CCC 2 thermostat will
recognize the updated selection.
To do a system reset:
1. Make sure the CCC 2 thermostat is in the OFF mode.
2. Simultaneously press the MODE and ZONE buttons. The LCD will display "IniT"
and all available zones.
3. Release the MODE and ZONE buttons.
4. Press the ON/OFF button to exit system set up.

GENERAL INFORMATION

A. Reduce Heat Gain
The ability of the air conditioner to maintain the desired inside temperature depends
on the heat gain of the RV. Some preventative measures taken by the occupants
of the RV can reduce the heat gain and improve the performance of the air condi-
tioner. During extremely high outdoor temperatures, the heat gain of the RV may
be reduced by:
● Parking the RV in a shaded area.
● U sing window shades (blinds and/or curtains).
● K eeping windows and doors shut or minimizing usage.
● A voiding the use of heat producing appliances.
Operation on High Fan/Cooling mode will give optimum or maximum efficiency in
high humidity or high outside temperatures.
Starting the air conditioner early in the morning and giving it a "head start" on the
expected high outdoor ambient will greatly improve its ability to maintain the desired
indoor temperature.
For a more permanent solution to high heat gain, accessories like Dometic outdoor
patio and window awnings will reduce heat gain by removing the direct sun. They
also add a nice area to enjoy company during the cool of the evening.
B. Disclaimer
The manufacturer of this unit will not be responsible for damage caused by con-
densation forming on ceilings, windows, or other surfaces. Air contains water vapor
which condenses when temperature of a surface is below Dew point. During normal
operation this unit is designed to remove a certain amount of moisture from the air,
depending on the size of the space being conditioned. Keeping doors and windows
closed when this air conditioner is in operation will greatly reduce the chance of
condensation forming on interior surfaces.
19