Fan Speed; Temperature Set-Point - Dometic 3314080.000 BLACK Operating Instructions Manual

PROGRAMMING & OPERATIONS
G. Fan Speed
Press the FAN button to select the desired fan speed. Each successive press will
advance to the next available speed. Your selections will be "Auto", "LOW", "MED",
and "HIGH". The fan will run continuously during "LOW", "MED", and "HIGH" fan
settings. The fan will cycle ON and OFF with the thermostat on "AUTO" setting. For
more information on auto fan, see section, "A. Auto Fan" on page (12).
H. Temperature Set-Point
Press the ∧ or ∨ button to change the temperature set-point. The temperature
set-point is indicated by (2) digits on the LCD. Press the ∧ button to increase and
the ∨ button to decrease the temperature set-point. The maximum set-point for the
system is 90 °F (32 °C). The minimum set-point is determined by the active operat-
ing mode. For heating, the minimum is 40 °F (4 °C) and minimum for cooling is 55
°F (13 °C).
9