System Reset Procedure - Dometic 3312026 series Operating Instructions Manual

System Reset Procedure

When your unit was installed the appropriate dip switches on the electronic control
board were turned on to match your system configuration. Any time these settings
are changed, a system reset will need to be done before the CCC 2 thermostat will
recognize the updated selection. To do a system reset:
• Make sure the CCC 2 thermostat is in the OFF mode.
• Simultaneously press the MODE and ZONE buttons. The LCD will display
"IniT" and all available zones.
• Release the MODE and ZONE buttons.
• Press the ON/OFF button to exit system set up.
This space intentionally left blank
11