On-Screen Service Menu System - Sanyo LCD-32XH6 Service Manual

On-screen Service Menu System

General
This set has an On-screen Service Menu System included in the CPU that allows remote operation for most of the
service adjustments.
On-screen Service Menu System
2 3
MATERIAL
PART NAME
Quick operation is needed to enter Service Mode.
PROOF
IND PS T=0.3MM
×
DEC. CONTROL SHEET-N6VV
+ ADHESSIVE TAPE NITTO-5000NS
How to enter the Service Menu
1.
Press and hold the MENU button on Side Controls.
2.
Keep pressing the MENU button and press the MUTE button on the remote control, and the FACTORY MENU
will be displayed.
Side Controls
MENU button
Open or close the On-Screen Menu.
[ Service Mode Menu ]
Service Mode
REVISION REV.BY
Source
MATERIAL(GENERAL/TYPE/MFR) PART CODE
:
1.000 1AA2DES0988--
REFER TO CHART ABOVE
PART NAME
:
Properties:
DEC. CONTROL SHEET-N6VV
FINISH ORIGINAL MODEL
MM
PRINTING : SP-515, FLEET GRAY 32-N6VV
Date:
DRAW.ID/FILE
1995/9 Pro/E
1AA2DES0988-- P1
DIVISION
How to select the service item and adjust data:
To adjust data:
1) Select "DATA" line by pressing
Service Mode
Source
Properties:
Date:
2) Press button to adjust data.
7 8
To exit service mode
Press MENU button to exit service mode.
Note: The all adjusted data in service mode will be memorized into EEPROM automatically.
4
ZONE
MATERIAL
A
B
C
D
E
NOTE
V1.04 1110UH4L42
SEC
HDMI1
PAGE
1 / 1
BrightnessOffset
PROD.CODE
0
PLOT DATE
04-Jul-08
JIS A4
ed button.
V1.04 1110UH4L42
HDMI1
BrightnessOffset
0
Version No.
Input Source
Item Name
Data Value
-12- -12-