On-Screen Service Menu System - Sanyo LCD-42XF7 Service Manual

On-screen Service Menu System

General
This set has an On-screen Service Menu System included in the CPU that allows remote operation for most of the
service adjustments.
On-screen Service Menu System
Quick operation is needed to enter Service Mode.
1.
Press and hold the MENU button on Side Controls.
2.
Keep pressing the MENU button and press the MUTE button on the remote control, and the FACTORY MENU
will be displayed.
Side Controls
MENU button
Open or close the On-Screen Menu.
[ Service Mode Menu ]
SERVICE
INDEX-000 575i SUB- CONT
ADDR. 097F
DATA : FA 11111010
1) Select "DATA" line by pressing
SERVICE
INDEX-000 575i SUB- CONT
ADDR. 097F
DATA : FA 11111010
2) Press button to adjust data.
Press MENU button to exit service mode.
Note: The all adjusted data in service mode will be memorized into EEPROM automatically.
Item Name
Address
Data Value
button.
-14- -14-