Section 4: Software Error Messages
Introduction
The CR Reader software sends various event information to the User screen regarding wrong steps taken by the
User, notes and error messages. The events presented in this section deal with software errors, giving the reason
for the events and how to handle them.
Error Description
This section is divided into several categories:
1. Errors from Kodak QC User Interface.
2. Errors from Settings screen in Technician Mode.
3. Errors from Image Storage in Kodak QC User Interface.
4. Errors from Procedure tool screen in Kodak QC User Interface.
Error Messages
The messages are displayed as a pop-up screen. Each event has a constant distinct description.
Error Number
The error numbers in the list below are for User convenience only.
AT000115-02
Software Error Messages
25