Grid Lines On The Image; Grid Lines On Image Artifact Example - Kodak Point-of-Care CR 120 System Troubleshooting Manual

Grid Lines on the Image

Grid Lines on Image Artifact Example

Note
The size of the grid lines varies with the magnification.
Cause
Grid lines on the image.
Fix
[1] Go to Technician>Settings>Setup screen.
[2] Check that Grid Suppression Filter is checked.
In Version 2.5 the grid suppression within Eclipse -Kodak Image Processing works best with 103 lp/inch grid. You
should avoid grids of 152 lp/inch. The algorithm does not suppress with frequency higher than 152 lp/inch.
46 AT000115-02