Page 1
If you have any questions about the Operating Instructions or the product, please contact us. If the Operating Instructions become illegible due to stains and/or tears, or if this booklet is misplaced, please request a copy from Takara Belmont. June 2024 (Version 1)
Table of Contents Introduction Description of Warning Symbols ................Safety Precautions ....................Precautions for Use ....................Precautions for Synthetic (Natural) Leather Care ..........Warning Label Locations ..................Accessories ......................Part Names ......................Preparation How to Install / Move ..................... How to Use How to Use ......................
If an accident occurs due to failure to follow the Safety Precautions, the Precautions for Use, and/or the Precautions for Synthetic (Natural) Leather Care, Takara Belmont is not responsible for any damage or risk to the person using this product or those around them due to accidents. In this case, the person failing to adhere to the Safety Precautions, the Precautions for Use, and/or the Precau- tions for Synthetic (Natural) Leather Care will be responsible for any damage or risk incurred.
● Precautions for installing this product ・For installation of this product, refer to ""How to install/move"" [on page 9]. ・Only qualified technicians (from Takara Belmont or Takara Belmont-designated contractors) are allowed to install the product. ・Make sure to install this product only on a flat, solid surface.
Page 5
Safety Precautions (Items That Must Be Followed) Warning When using or cleaning … ● When getting on and off the chair bed, raise the backrest and get on and off from the seat. When getting on and off the chair bed, please get on and off from the seat while in the chair position.
Safety Precautions (Items That Must Be Followed) Caution Installation and moving ● Moving When moving, dragging the chair bed may damage the floor surface or cause the chair bed to malfunction or be damaged. When using or cleaning … ● Do not wipe with chemicals. Leather and resins may deteriorate or discolor.
Precautions for Synthetic (Natural) Leather Care ● Stain from garment dyes The synthetic leather of this product may incur color transfer due to contact with the user’s clothing or belt. If such color transfer occurs, wipe with a soft cloth moistened with neutral detergent diluted about tenfold with water, followed by wiping with a cloth moistened with water, then carefully wipe with a dry cloth as quickly as possible to avoid further penetration.
Accessories • Operating Instructions (this document) • Request regarding bed use during treatment (1 sheet) Part Names Backrest Seat Armrests Leg rest Level adjuster Backrest lever Gas cylinder...
How to Install / Move When installing or moving the chair bed •When installing or moving, hold the chair bed firmly by the legs. Lifting the chair bed by anything other than the legs may damage the chair bed. • Do not move the chair bed with a person on it. A fall may cause damage to the chair bed or a person may fall and be injured.
How to Use Welcoming a client Guide the client to the chair bed. Make sure the chair bed is in its initial position (chair position), and have the client sit on the seat from the front of the chair bed and sit all the way to the back.
Cleaning Instructions Maintenance should be performed after using the product to keep it clean at all times. Stains left uncleaned may lead to the growth of mold. Some metal parts and mechanical sections of the product have sharp edges. Take Caution caution not to injure your hands or fingers during cleaning.
Daily Inspection The following inspection should be performed for safe use of the product. Daily inspections must be performed according to the details shown below. Warning Use without performing daily inspections may lead to injury and damage to the product, peripheral equipment, installations, etc. Daily inspection items Inspection item Inspection method...
In the case of significant wear and deterioration or damage, inspection or replacement of the parts will be necessary. Please contact your local Takara Belmont dealer immediately. Parts not covered by warranty • This product contains no parts designated as "parts not covered by warranty".
Specifications Product number ....................SC-754 Weight ........................ 35 kg Maximum load ................1350 N (135 kgf) Usage environment temperature ............0 to 40°C Humidity ..............10 to 95% Atmospheric pressure ........700-1060 hPa SC-754 1710 • Unit: mm • The dimensions and specifications given here are subject to change for improvement without notice.
Need help?
Do you have a question about the SC-754 and is the answer not in the manual?
Questions and answers