Installation - HighSecLabs SM20N-N Quick Setup Manual

SEC TIONS
Table of Contents
oPeRaTIoN
Copy & Paste Setup
Note: for CoM port setup skip to step 3.
1. Connect a USB storage device to one of the USB 3.0 ports situated
on the product's front facing panel.
2. Connect each computer to the KVM USB computer port using a
USB a to USB B cable. Connect the USB a end to the computer
and the USB B end to KVM.
3. Download the Virtual Clipboard agent application setup file from
HSl website (<URl>). (Currently available only for Windows).
4. Run the setup file and follow the on-screen instructions to install
the Virtual Clipboard agent on each computer that requires Copy
& Paste access. Click INSTall when prompted by the Wind ows
Security pop-up window during the driver installation.
8-Port
HSL KM Switch Quick Setup Guide
1
Copy & Paste Configuration
once the installation is complete, right click the system tray Clipboard
Manger icon and select Setting to open the Clipboard Manager setting
window.
HSL Clipboard Manager setting
• Operational mode: select where copied data is stored (USB/CoM).
• System tray notifications: select when to display notifications.
• Copy/Paste settings: limit file size and type.
• COM/USB settings: setup advanced port settings.
Working with Copy & Paste
To copy text or files from one computer to another, use standard copy
keyboard key combination or mouse gestures.
for example:
1. on the source computer (where the data that you want to copy
resides) use (CTRl+C) to copy the data into the KVM buffer (USB/CoM).
2. Press the corresponding KVM button to switch to the target
computer (where you want to copy the data to).
4-Port
3. Use standard paste keyboard key combination (CTRl+V) or mouse
gesture to paste the data to the the destination computer.
2 3
14