Settings; Starting Recording Again When The Full Indicator Lights - Sanyo DSR-M800 Instruction Manual

e_dsr_m800.book Page 28 Friday, January 31, 2003 5:45 PM
2 REC MODE SET

Settings

[MENU] button [
SEARCH
MENU REVIEW
MENU RESET
[ ] button
1
Press the [MENU] button.
The [MENU] button lights, and the <MAIN MENU> screen
appears.
2
Select "2. REC MODE SET", and press
the [ ] button.
The <REC MODE SET> screen appears.
3
Press the [ ] and [
the desired item, then press the [
button.
4
Press the [ ] and [
change the setting, then press the
[ ] button.
5
Use the same procedure to set the other
items as needed.
6
When you have finished making the
settings, press the [EXIT/OSD] button.
The display returns to the normal screen.
] button [ ] button
PLAY/
STOP
CUE EXIT/OSD
STILL
[EXIT/OSD] button
] buttons to select
]
] buttons to
Starting recording again when the
FULL indicator lights
When "OVER WRITE" is set to "OFF" and the hard disk
becomes full, the FULL indicator lights and recording stops.
To start recording again, first follow the steps below to
erase the images recorded so far.
[ ] button
POWER
SEARCH
MENU REVIEW CUE
TIMER
MENU RESET
FULL
LAN
(LINK/ACT.)
FULL indicator [ ] button
1
Display the <REC MODE SET> screen.
2
Press the [ ] or [ ] button to select
"DISK FULL RESET", then press the
[ ] button.
The <WARNING> screen appears with "NO" flashing.
3
Press the [ ] or [ ] button to select
"YES", then press the [
The images recorded so far are erased, and the display
returns to the normal screen.
The FULL indicator goes out, and you can record again
until the disk becomes full.
[ ] button
ALARM
PLAY/
STOP
EXIT/OSD
REC/STOP
STILL
LOCK/REMOTE
USB
] button.
28